Dual Turn Up Star Or Heart Tube Tip
PLEASE NOTE: This is a one-person business, and these tips are made to order. Orders may take 2-6 weeks to complete.
Free shipping within the Continental U.S
304 Stainless Steel Exhaust Tips are handmade and hand TIG welded in the Pacific Northwest.
Price is for one tip.
Tip Main Size: 4” round and 3” round option. Overall width is roughly 8.25” wide for 4” and 6.25” for 3”.
Printable Paper Cutouts For Sizing to see what fits your car best!
Tip Length: 18” overall length for 4” and 16” overall length for 3”. 6” long after y pipe and before pie cuts.
6” long straight before turn up section and after y pipe.
Inlet Size: 4” tip will have an inlet size of 2.5”, can be trimmed back to 3”. The 3” tip will have an inlet size of 2”, can be trimmed back to 2.5” or 3”.
Inlet size needs to be the diameter of your exhaust for proper installation. Please measure the diameter of your exhaust pipe prior to purchase of this exhaust tip. This exhaust tip will need to be welded on.
These tips have 4 pie cuts, so the angle upward is around 55-60 degrees.
No hole is drilled at the bottom of these tips for water drainage. It is recommended to drill one if it is needed when you have them professionally installed.
Please contact me if you would like an update on the status of your order.
Note:
For off-road use only
Exhaust tips are sharp and may cause injury
May change pitch/tone of exhaust
Professional installation required
Will need to be welded on
Abelfabparts is not responsible for incorrect installation and/or use of the product
PLEASE NOTE: This is a one-person business, and these tips are made to order. Orders may take 2-6 weeks to complete.
Free shipping within the Continental U.S
304 Stainless Steel Exhaust Tips are handmade and hand TIG welded in the Pacific Northwest.
Price is for one tip.
Tip Main Size: 4” round and 3” round option. Overall width is roughly 8.25” wide for 4” and 6.25” for 3”.
Printable Paper Cutouts For Sizing to see what fits your car best!
Tip Length: 18” overall length for 4” and 16” overall length for 3”. 6” long after y pipe and before pie cuts.
6” long straight before turn up section and after y pipe.
Inlet Size: 4” tip will have an inlet size of 2.5”, can be trimmed back to 3”. The 3” tip will have an inlet size of 2”, can be trimmed back to 2.5” or 3”.
Inlet size needs to be the diameter of your exhaust for proper installation. Please measure the diameter of your exhaust pipe prior to purchase of this exhaust tip. This exhaust tip will need to be welded on.
These tips have 4 pie cuts, so the angle upward is around 55-60 degrees.
No hole is drilled at the bottom of these tips for water drainage. It is recommended to drill one if it is needed when you have them professionally installed.
Please contact me if you would like an update on the status of your order.
Note:
For off-road use only
Exhaust tips are sharp and may cause injury
May change pitch/tone of exhaust
Professional installation required
Will need to be welded on
Abelfabparts is not responsible for incorrect installation and/or use of the product
PLEASE NOTE: This is a one-person business, and these tips are made to order. Orders may take 2-6 weeks to complete.
Free shipping within the Continental U.S
304 Stainless Steel Exhaust Tips are handmade and hand TIG welded in the Pacific Northwest.
Price is for one tip.
Tip Main Size: 4” round and 3” round option. Overall width is roughly 8.25” wide for 4” and 6.25” for 3”.
Printable Paper Cutouts For Sizing to see what fits your car best!
Tip Length: 18” overall length for 4” and 16” overall length for 3”. 6” long after y pipe and before pie cuts.
6” long straight before turn up section and after y pipe.
Inlet Size: 4” tip will have an inlet size of 2.5”, can be trimmed back to 3”. The 3” tip will have an inlet size of 2”, can be trimmed back to 2.5” or 3”.
Inlet size needs to be the diameter of your exhaust for proper installation. Please measure the diameter of your exhaust pipe prior to purchase of this exhaust tip. This exhaust tip will need to be welded on.
These tips have 4 pie cuts, so the angle upward is around 55-60 degrees.
No hole is drilled at the bottom of these tips for water drainage. It is recommended to drill one if it is needed when you have them professionally installed.
Please contact me if you would like an update on the status of your order.
Note:
For off-road use only
Exhaust tips are sharp and may cause injury
May change pitch/tone of exhaust
Professional installation required
Will need to be welded on
Abelfabparts is not responsible for incorrect installation and/or use of the product